Learning The Ways Of Doing Custom Glass Etching - Hallo The Flop House, n the article you read this time with the title Learning The Ways Of Doing Custom Glass Etching, we have prepared well for this article you read and download the information therein. hopefully fill posts you write you can understand. Happy reading.

Tilte : Learning The Ways Of Doing Custom Glass Etching
links : Learning The Ways Of Doing Custom Glass Etching

Learning The Ways Of Doing Custom Glass Etching

By Cecile Ingram

Not all people have personally done custom glass etching because a lot of individuals think that it is difficult. However, this can be done by using just some basic steps. Here are the steps on doing it.

One of the most important material that will be used is the stencil which will be the basis of the design that will be etched. The common material used is vinyl and a lot of hardware stores sell this because they are usually used as a wall decor. If you already have this, place this flatly onto a shelf liner and tape the sides.

The chosen letter, image or shape should then be traced and then cut this pattern to make the stencil. Use a craft cutter or a utility knife will do and hold this in ninety degrees so that it is kept perpendicular to the surface of the material. Peel off that part of the stencil cut so as to leave only the negative space created.

Procure a sheet of transfer paper or a contact paper will do as long as this piece has a sticky side. The front portion of the vinyl must be placed over it and then the sticky back part will be peeled away. Be sure that the object is already clean and if it is not, then clean it using a piece of cotton ball with alcohol.

Stick the back of the vinyl onto the glass surface where the imprint should be and ascertain that there should not be bubbles underneath. If there are any, press down your fingers firmly and release the trapped air into the opening of the stencil. If this would not be done, the result might be a mess.

Applying a layer of the etching cream on the exposed area is the next step and this should be done carefully. Make sure to cover only the pattern wanted to be printed and leave the cream as is according to the instruction in the package. The cream is an acidic chemical that etches away the surface and the imprint cannot be washed or rubbed off being permanent.

Wash the chemical well from the object with water and rub it with your fingers after it has been set to stay on the piece for the required moment. Then, remove the pattern so that the whole object can them be cleaned thoroughly using also water and soap. Have it be dried and be amazed about how the chemical has done all the actual work.

To include more embellishments or design details, another idea is to use scrap booking materials to make the outcome even more attractive. Using a painters tape will also cost less since this is much cheaper in hardware stores. Tape this onto a sheet material and stick the stencil onto it.

Making a home project like custom glass etching, be cautious about keeping things away from children. In using the cream, be sure to wear gloves as the acidic agent is corrosive to the skin. Also be extra careful in using the sharp tools by making sure that the surface is well stabilized and hold the tool with a firm grip.

About the Author:

You can visit the website www.danielsglass.com for more helpful information about Secrets On How To Do Custom Glass Etching

Thus articles Learning The Ways Of Doing Custom Glass Etching

that is all articles Learning The Ways Of Doing Custom Glass Etching This time, hopefully can provide benefits to all of you. Okay, see you in another article posting.

You now read the article Learning The Ways Of Doing Custom Glass Etching with the links address https://theflophouse.blogspot.com/2013/09/learning-ways-of-doing-custom-glass.html